Home    PoE Accessories    E7002-1P-25 Gigabit POE Extender

E7002-1P-25 Gigabit POE Extender

  • Description

    Ethernet and PoE connections both restrict cable distances to 100 meters between network ports. To overcome this distance limit, network installers can simply connect an PoE Extender in-line with the Cat-5e or Cat-6 calbe(Outdoor type).

    With Gigabit PoE Extender, PDs (such as IP Security Cameras,  wireless access points) can be installed at greater distances than 100 meters from one another. By connecting PoE Extender for every extra 100 meters of cable, both Ethernet and PoE can be extended to 200 meters,  depending on PDs power required and power source.

    Gigabit PoE Extender does not require any additional power supply and the connected PDs is fed by an single PoE switch or mid-span, which simplifies installation. PoE Extender offers two Gigabt Ethernet ports, which are both configured automatically for link speed, duplex and crossover and the full-rate network throughput is main-tained.PoE in connection PoE Switch, 12.36 or 45.78 powered support, support IEEE802.3af & at  the power supply, PoE out for the supply terminal 1 Gigabit, PoE total power can reach 25w (PoE Switch need to provide IEEE802.3at power)

    Features

       Compatible with IEEE802.3af and IEEE802.3at

       Extends the range of PoE and Gigabit Ethernet an additional 100 meters

    •   No additional power supply is required

    •   Automatically detects and protects PoE equipments from being damaged by incorrect installation

    •   Gigabit Full-rate network throughout the whole extended distance 

    •   Wall-Mountable design

    •   Easy plug-and-play installation

     

     

    Specifications

    Item

    Description

    No. of channels

    1(PoE IN) into 1(PoE OUT)

    Pass Through Data Rates

    10/100/1000 Mbps half/full duplex

    Power over Ethernet input

    Pin Assignment and Polarity:

    Both 1/2 (-), 3/6 (+) and  7/8 (-), 4/5 (+)

    Power over Ethernet Output

    Pin Assignment and Polarity:

    1/2 (+), 3/6 (-)

    Output Power: up to 22W 

    Connectors

    RJ-45, EIA 568A and 568B

    Network cables

    Shielded category 5 (or higher)

    Dimensions

    145mm x 60mm x 40mm

    Mounting

    Wall of shelf

    Environment

    Indoor 

    Environmental Conditions

    Operating Ambient Temperature:-10 to 40

    Operating Humidity:

    Maximum 90%, Non-condensing

    Storage Temperature:-30 to 70

    Storage Humidity:

    Maximum 95%, Non-condensing

    Regulatory Compliance

    IEEE 802.3af (PoE), IEEE 802.3at (PoE+)

     

Features
•   Compatible with IEEE802.3af and IEEE802.3at
•   Extends the range of PoE and Gigabit Ethernet an additional 100 meters
•   No additional power supply is required
•   Automatically detects and protects PoE equipments from being damaged by incorrect installation
•   Gigabit Full-rate network throughout the whole extended distance 
•   Wall-Mountable design
•   Easy plug-and-play installation